Part Number:
IC698PSA350Weight:
2 kgDimensions:
6.3cmX19cmX29.2cmManufacture Year:
2021Place of Origin:
USACertification:
CO,CQDescription:
General Electric/GE Fanuc IC698PSA350 Power Supply
|
Manufacturer: |
General Electric |
|
Part Number: |
IC698PSA350 |
|
Series: |
PACSystems* RX7i
|
|
Full Description: |
General Electric IC698PSA350 Power Supply
|
|
Status: |
In stock |
| Warranty | 12 Months |
IC698PSA350 is a PACSystems Power Supply Module produced by GE Fanuc for the RX7i series. This module
delivers +5 VDC, +12 VDC, and -12 VDC power. In addition, it sends logic level sequencing signals to modules
on the backplane. The module plugs into slot 0 in the main rack.
The IC698PSA350 module’s power supply output may lose one AC input line cycle while maintaining output power.
Overcurrent and overvoltage fault protection is provided in addition to electronic short circuit protection. The module
permits 100 watts total output power at ambient temperatures of 0 to 60ºC without forced air cooling.
Output voltages are as follows: +5 VDC output to 60 amps, +12 VDC output to 12 amps, and -12 VDC output
to 4 amps.
More notable features of the IC698PSA350 module include operation from 85 to 264 VAC or 100 to 150 VDC.
The module is equipped with AC operation power factor correction and easy slide-in rack mount construction.
The two-position On/Off logic level switch can be found on the front faceplate. It has the capability to enable or
disable output channels and will not disturb the AC line input. Important warning: Lethal voltages are present in
the module when input power is present.
Green LED indicators on the IC698PSA350 module monitor the status of field and output. These will turn ON when
power is applied within the acceptable range and when DC output channels are operating correctly. A red LED
specific to this module will alert the user if critical supply temp is too high or if there is an issue with airflow.
Technical Specifications
Nominal Rated Voltage: 120/240 VAC or 125 VDC
Input Voltage Range: 85 to 264 VAC or 100 to 150 VDC
Input Power: 437 W
Output Voltages: + 5 VDC, +12 VDC or -12VDC
Module Type: Power Supply
Rack Location: Slot 0 (Leftmost slot)
Manager Steve quotes to you
cn@mooreplc.com 
+8618005028963
we offer original new with 1 year warrenty
4)Large inventory: Our warehouse is capable of holding up to 60,000 pallet spare parts.
| GE |
GE |
GE |
|
DS200LPPAG1A |
IC698CRE030 |
IC200ALG264 |
|
DS200UPSAG1AGD |
IC698PSA350 |
IC200TBM002 |
|
DS200DDTBG2ABB |
IC695PSA140 |
IC200ALG240 |
|
DS200TCPSG1AME |
IC695ACC400 |
IC200BEM003 |
|
DS200SDCCG5A |
IC698CPE020 |
IC200CPUE05 |
|
DS200PCCAG5ACB |
IC695CMM004 |
IC200ALG322 |
|
DS200TCCAG1BAA |
IC694APU300 |
IC200CHS022 |
|
DS200TBQBG1ACB |
IC694PWR331 |
IC200UDR005 |
|
DS200SDCIG1AFB |
IC697CPU782 |
IS200ERGTH1AAA |
|
DS200TCQBG1BCB |
IC697MDL350 |
IC694PWR331 |
|
DS200DTBBG1ABB |
IC697CPU731 |
DS3800NMEC1K1K |
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
